5 Ways To Fix DirecTV Remote Volume Not Working Issue

You need the DirecTV remote to control the sound volume. Having the volume too loud or too loud can be frustrating. That is why you need the volume buttons on the DirecTV remote control. What happens when the volume buttons on your DirecTV remote stop working?

If your DirecTV remote volume isn’t working, this post is for you. In this post, you will understand why your DirecTV remote volume isn’t working. Also, you will find tips to fix the issue in no time.

Why Is My DirecTV Remote Volume Not Working?

There are several reasons why the volume buttons on your DirecTV remote won’t work. For instance, if the remote isn’t programmed correctly. Another reason could be that the batteries on the remote control are low. Below is a breakdown of why your DirecTV remote volume stopped working.

a. Battery Issue

When there is an issue with your DirecTV remote, the first thing to check is the battery compartment. It could be that the batteries were not placed well or the batteries are low. If you’ve used the same set of batteries for a while, it could be that the batteries are dead.

b. Obstructions Blocking The Receiver

For the DirecTV remote to work, there must be a clear pathway between the remote and the receiver. If there is a big item blocking the receiver, it will in turn block signals. Also, the remote must be held close enough to the receiver.

c. Signal Blockers

For the DirecTV remote to work, the remote and receiver must be able to send and receive signals. Some items work as signal blockers. Such items weaken the signal between your remote and the receiver. Such items include cordless phones, microwave ovens, baby monitors, and similar wireless devices.

d. Programming Issue

The DirecTV needs to be programmed to the receiver for it to work. If the remote is not programmed correctly, it will affect not just the volume buttons but other buttons.

5 Ways To Fix DirecTV Remote Volume Not Working Issue

a. Check The DirecTV Remote Batteries

First, check the batteries to ensure they are placed well. DirecTV remote makes use of AA batteries. Follow the tutorial on the correct way to place AA batteries in your remote control.

Also, check the batteries and make sure they are not dead. The advanced feature programmed in the DirecTV remote requires extra battery power. Thus, the batteries drain out fast.

One way to know your remote batteries are bad is to check for wet patches on the batteries. Sometimes, you may not see the wet patches. But if you’ve used the same set of batteries for months, then it’s time to get a new battery set.

b. Remove Obstructions And Blockers

Remove any heavy item blocking the receiver. Also, check for signal blockers and put them away from the receiver. Blockers can be any wireless device like routers, baby monitors, and cordless phones.

c. Program The DirecTV Remote To Receiver

If none of the buttons on your DirecTV remote is working, it means you need to program the remote again. You have to pair the receiver and TV again. Follow the steps below to complete

Program DirecTV Remote To Receiver

. Hold your DirecTV remote close to your Receiver and TV.

. Press and hold the ‘Select’ and ‘Mute’ buttons simultaneously until the tiny LED on your remote blinks twice.

. Enter the code ‘9-6-1’ and. press the ‘CH’ button and ‘Enter’ button.

. You will see the on-screen message ‘Applying RF/IR Setup’ Wait for the programming process to complete.

Program DirecTV Remote To TV

. Press the ‘Menu button on your remote.

 . Scroll down the menu and select ‘Settings’ from the options.

. Press the right arrow button on the remote until you see the ‘Remote Control’ option.

. Select ‘Pair/ Program Remote’ from the new menu.

. Select ‘Change TV’.

. Enter your TV Model. You can select the ‘I Don’t Know My Model’ option if you don’t know your TV model.

. Enter the code on the screen and press ‘Enter’. Click on ‘Try the Next Code’ if the first code doesn’t work until you get the right code.

d. Power Cycle The Remote And Receiver

Another reason your DirecTV volume button isn’t working could be that your receiver isn’t getting signals from the remote. In this case, power cycling the device comes in handy.

Power cycling has to do with turning off the device from the power switch and turning it back again. The purpose is to recover your device from an unresponsive state or to initiate its configurations.

To power cycle, your receiver, unplug from the power source. Wait for 15 seconds and plug back into the power source. Press and hold the Power button to restart your device.

e. Factory Reset Your Receiver

The factory reset should be your last option. When you factory reset your receiver, it will clear all prior saved settings. It means you have to program your receiver again after the reset. Follow the steps below to factory reset your receiver.

. Press and hold the ‘Red Button’ on your receiver. The red button is the reset button and can be found on the side of the receiver.

If your receiver doesn’t have the red button, follow the steps below to reset the device.

. Press the ‘Menu’ button on your remote.

 . Scroll down the menu and select ‘Settings’ from the options.

. Press the right arrow button on the remote until you see the ‘Remote Control’ option.

. Select ‘Reset Remote’ from the new menu.

. Wait for the reset process to complete.